Click image to view full size image
1. Start the machine as follows: Cylinder-tooth roller-section
Fansoften machine-dryer-slash box.
Note: The carding machine should be kept running for half hour after turn-off all The other machine.
2. Before setting up the line, put the evenly blended pulp into slash box for finishing machine. Sets the finishing roller pressure and ask one worker keeping in watch of web, then sets the first Team pressure to 3Mpa and second the third teams to 3.5Mpa. Ready for Production.
3. In the beginning, the cotton is feeded by worker into feeder, then the cotton goes through soften machine, iron catcher, later on sucks into cotton basket by suction fan, then carding machine, web-former, web-dryer, conducted to slash box by worker, finally the web will be flattened and dried by dryer. After all these steps, then we get the end product
II. Raw material
1. Water
2. Regenerative cotton
3. Starch glue
4. Calcium powder
III. Parameters
1. Net width: 80cm, 220cm
2. Product Weight: 18-120GSM
3. Capacity: Above 60kg/h
4. Mechanical speed: 900m/h---1800m/h
5. Product quality: With a cross and machine direction ratio 1: 1, even surface, no fuzz-like Appearance.
6. Total power: 38kw
7. Floorspace: 25m(L) × 10m(W) × 4m(H)
8. People needed: 3 to 4 people for every shift
IV. Line Structure
This line includes soften machine, automatic cotton feeding machine, carding machine, draft web-former, web-dryer, flatting machine, dryer, winder with a counter, electrical controlling cabinet. (note: The line for export will be equipped with electrical controlling cabinet, the home selled line will be equipped with regular switchs. )
V. Operation Technics
1. This line adopts to the technology of forming the web by draft.
2. Theory: Soften ---- carding---- form the web by draft ---- finishing and flatting ---- drying ----counter and wind.
VI. The oil-refuel drawing
1. Soften machine
2. Flatting machine
3. Carding machine
4. Dryer
VII. Heats Way
Steam boiler or cycling oil heated boiler
(note: The boiler should self-prepared by buyer)
VIII. Safety Instruction
1. There should be some extinguisher equipped beside the machine. The staff should Well-trained master safety manipulation.
2. The machine should be switch to low speed when the adhesive is pasted on roller.
3. The worker should not keep too close to dryer, conduct the web through dryer, or Else may burn himself.
4. The cables for moters and drivers should be connected by well-trained wireman.
There should be insulated pipe covering outside the cables.
I. Application field of product
The machine is used for turning all kinds of regenerative cotton into embroidery and make it into roll at a certain length.
IX Usage
The line is used for turning all kinds of recyle cotton into embroidery backing papers and turn it into roll in certain length as required.
| Sequence | Name | Sequence | Name |
| 1 | Feeding mouth of cotton | 12 | Web dryer |
| 2 | Soften machine | 13 | Suction fan |
| 3 | Ron catcher | 14 | Air-out pipe |
| 4 | Suction fan | 15 | Slash box and flatting machine |
| 5 | Outgoing air pipe | 16 | Rubber roller |
| 6 | Cotton-in pipe | 17 | Drying cylinder |
| 7 | Cotton basket | 18 | Drying reel |
| 8 | Cotton feeding roller | 19 | Drying rack |
| 9 | Carding machine | 20 | Counter |
| 10 | Lifting roller | 21 | End product |
| 11 | Web-former |
FAQ:
Q1:What's the MOQ, Delivery time, and payment terms?
A1: 1. MOQ: 1 set
2. Delivery time: 20 workdays after receiving T/T 30% payment deposit
3. Payment Term: T/T 30% as deposit, T/T 70% before shipment or L/C at sight
Our Service:
1. Warranty
1 year limited warranty after installation.If the spare parts is broken in the warranty
period , we will send a free replacement parts to you .
2. Installation and Training
We can send 1-2 engineers to buyers factory to install and set up the machines and
training, but all the charges for the engineers should be paid by buyer.
3. Quotation
The quotation is available in 60 days
Shipment:
Company Information
1.About us
Wenzhou Changs Machinery Co.,Ltd is one of the first company specialized in manufacturing printing machines, packing machines, plastic machine and paper converting machines,has owned export and import license since 2004.
To consider our full service convenience, we have set up service office and showing room at DRAGON-MART of Dubai to provide technical service for customers from Middle East and Africa in 2006, and also we have established technical support offices in Mexco, Egpty and Singapore, our service has satisfied with all of our customers. We enjoy sound reputation in oversea's market and domestic.
Certificate: